Cable Pinouts For Serial Connectors - 3Com 3CRGPC10075 User Manual

4 Click Apply, and then click OK.
5 Click Connect to start the connection. A prompt for the user name and
6 Enter your logon name and password. These are the same as the user
Cable Pinouts for
Serial Connectors
Figure 53 COM Port Properties Screen
password appears.
name and password that you use for the Web interface. The default user
name is , and the default password is
admin
The command prompt appears. You are now connected to the Access
Point via the serial port. Once connected, you can use any of the
commands listed in "Command Reference"
Figure 54 and Figure 55
the cables that you can use to connect via the console port.
Connecting to the CLI via the Serial Port
password
starting on
describe the connector pinout assignments for
107
.
page 108.