3Com 3CRGPC10075 User Manual page 59

If you have a DHCP server on the network and you want the Access
■
Point to automatically obtain its IP address from the DHCP server, click
DHCP Client.
If you do not have a DHCP server on the network, click Fixed IP
■
Address. The Access Point will use its default IP address
(
192.168.0.228
settings do not match your network settings, change them to ensure
that the Access Point and other devices on the network can
communicate with each other.
4 If you have a WINS server on the network, and you want to use it to
resolve names and addresses used by the Access Point, click Enable WINS,
and then type the host name or IP address in WINS Server Name/IP
Address.
5 Click Save, and then Apply/Restart.
) and subnet mask (
Configuring System Settings
). If these IP
255.255.255.0
51