3Com 3CRGPC10075 User Manual page 84

76 C 4: C
HAPTER ONFIGURING THE
W S
IRELESS TATIONS
Enabling Encryption
To enable encryption for a wireless network:
1 Click the Wireless Networks tab.
Figure 41 Wireless Networks Tab
2 From the list of available networks, click the SSID for the Access Point,
and then click Configure.
3 On the Wireless Network Properties screen, specify the SSID for the
Access Point, and then configure the wireless network key settings.
For example, if you need to use EAP-TLS:
Select the Data encryption (WEP enabled) check box.
■
Select the The key is provided for me automatically check box.
■