Figure 33 IP Address Range Screen
6 Add exclusions in the address fields if required. If no exclusions are
required, leave it blank. Click Next.
7 Change the Lease Duration time, if necessary, and then click Next.
8 Select Yes, I want to configure these options now, and click Next.
9 Type the router address for the current subnet. If there is no router on the
network, leave the router address blank. Click Next.
10 In the Parent domain, type the domain name you specified during the
domain controller setup, and then in IP address, type the server's address.
Click Next.
11 If you do not have a WINS server on the network, simply click Next.
12 Select Yes, I want to activate this scope now.
13 Click Next, and then click Finish.
14 Right-click the server name, and then click Authorize.
Using 802.1x
67