Figure 59 Internet Protocol (TCP/IP) Properties Dialog Box on Windows 2000
4 Verify that the TCP/IP settings are correct.
If a DHCP server automatically assigns IP addresses on the network,
■
click Obtain an IP address automatically.
If static IP addresses are assigned to computers on the network, click
■
Specify an IP address, and then do the following:
In IP Address, type an IP address that belongs to the same range as
■
the IP address assigned to the Access Point. For example, if the
Access Point is using its default IP address (
an IP address within the range
(except
192.168.0.228
In Subnet Mask, type the same subnet mask that is assigned to the
■
Access Point. For example, if the mask that is assigned to the
Access Point is
5 Click OK.
You may have to restart the wireless station for the changes to take
effect.
Configuring TCP/IP on Windows 2000
192.168.0.1
).
, type
255.255.255.0
192.168.0.228
to
192.168.0.255
.
255.255.255.0
129
), type