3Com 3CRGPC10075 User Manual page 38

30 C 3: C
HAPTER ONFIGURING THE
A P
CCESS OINT
802.1x – Uses WEP for encryption and a RADIUS server on the
■
network to perform client authentication
For more information on configuring each encryption method, refer to
"Configuring Encryption and Authentication"
6 If you have a RADIUS server on the network and you want to centralize
client authentication on the RADIUS server, configure the settings for
RADIUS-based MAC address authentication.
RADIUS MAC authentication is not supported by WPA-PSK and
WPA-802.1x. If you set the wireless security system to either WPA-PSK or
WPA-802.1x, the Configure button for RADIUS MAC Authentication will
be unavailable.
More information about these options is available in
RADIUS MAC Authentication"
After configuring the settings for RADIUS-based MAC authentication,
click Save, and then Close. Current Status for RADIUS MAC
Authentication will change to Enabled after you save the security profile.
7 If user access to the wireless network needs to be accounted for and you
have a RADIUS server on the network, you can configure Universal Access
Method (UAM) for the security profile.
UAM authentication is not supported by WPA-PSK and WPA-802.1x. If
you set the wireless security system to either WPA-PSK or WPA-802.1x,
the Configure button for UAM will be unavailable.
More information about these options is available in
on page 40.
After configuring the settings for UAM, click Save, and then Close.
Current Status for UAM will change to Enabled after you save the security
profile.
8 Click Save, and then click Back.
9 From the list of current profiles, click the profile that you have just
configured, and then click Enable.
10 Click Save, and then click Apply/Restart.
on page
on page 38.
31.
"Configuring
"Configuring UAM"