Backing Up The Access Control List; Configuring System Settings - 3Com 3CRGPC10075 User Manual

Backing Up the
Access Control List
Configuring System
Settings
Figure 24 Enabling MAC Address Based Access Control
To ensure that you can easily restore the access control list if it
accidentally erased, 3Com recommends that you back it up periodically.
To back up the access control list:
1 On the Access Control tab, click Write to File. The File Download dialog
box appears.
2 Click Save. The Save As dialog box appears.
3 Specify a location on the local disk to which to save the file and modify
the file name (if necessary). The default file name is
4 Click Save.
5 Verify that the list was successfully saved by checking if the file exists in
the target location.
System settings include information that helps identifies the Access Point
on the network, including the Access Point name, IP address settings, and
WINS configuration.
If you only need to view the current system settings, click Status on the
menu, and then check the information on the Status tab.

Configuring System Settings

maclist.acl
49
.