3Com 3CRGPC10075 User Manual page 45

Table 9 Options for 802.1x
Option
RADIUS Server
Address
RADIUS Port
Client Login Name
Shared Key
WEP Key Size
Dynamic WEP key
(EAP-TLS, PEAP)
Static WEP key
(EAP-MD5)
RADIUS Accounting
Description
Type the host name or IP address of the RADIUS server on
the network
Type the port number used for connections to the RADIUS
server.
This read-only field displays the name used for the client
login on the RADIUS server. This logon name must be
created on the RADIUS server. On some RADIUS servers, you
can use the Access Point's IP address instead of this name.
Key used for client logon to the RADIUS Server. Type a key
value that matches the value on the RADIUS Server.
Select the preferred WEP key size:
64 bit – Data is encrypted, using the default key, before
■
being transmitted. You must enter at least the default
key. For 64 bit encryption, the key size is 5 chars (ASCII)
or 10 chars in HEX (0~9 and A~F).
128 bit – Data is encrypted, using the default key, before
■
being transmitted. You must enter at least the default
key. For 128 bit encryption, the key size is 13 chars
(ASCII) or 26 chars in HEX (0~9 and A~F).
156 Bit – Data is encrypted, using the default key, before
■
being transmitted. You must enter at least the default
key. For 156 bit encryption, the key size is 16 chars
(ASCII) or 32 chars in HEX (0~9 and A~F).
If checked, the required WEP key is dynamically generated.
This may use EAP-TLS, PEAP, or another method, depending
on the methods supported by the client.
Key Exchange – Enable this if you want dynamic keys to
■
be exchanged and updated regularly. If enabled, you
need to specify the Key Lifetime.
If enabled, this uses EAP-MD5. You must enter the WEP key
on the WEP Key field below, and on each wireless station.
The WEP Key Index must also match the key index used on
other wireless stations.
Sends accounting data from the Access Point to the RADIUS
server.
To enable, select the Enable RADIUS Accounting check
■
box, and the, in RADIUS Accounting Port, type the
corresponding port number.
Define interval at which updated data will be sent to the
■
RADIUS server by selecting the Update Report every [ ]
Minutes check box, and specifying a number minutes.
Defining Security Profiles 37