Viewing Profiles - 3Com 3CRGPC10075 User Manual

82 C 5: P
HAPTER ERFORMING

Viewing Profiles

A A
DDITIONAL DMINISTRATIVE
Table 16 Access Point Information
Field
Domain
Firmware Version
Table 17 TCP/IP Settings
Field
IP Address
Subnet Mask
Gateway
DHCP Client
Table 18 Wireless Settings
Field
Channel/Frequency
Wireless Mode
AP Mode
Bridge Mode
To view a summary of the all current profiles (both enabled and disabled):
1 On the menu, click Status.
2 Click the Profiles tab.
Information about all current profiles, including the profile name, SSID,
security settings, status, and the number of currently associated clients,
appears on the Profiles tab.
T
ASKS
Description
Displays the current country or domain. If this is not
configurable on the System screen, this means this is the only
region for which the device is licensed for use.
Displays the version of the firmware that is installed
Description
Displays the IP address that is currently assigned to the device
Displays the network (or subnet) mask for the assigned IP
address
Displays the gateway IP address for the local network to
which the device is connected. For the Access Point and
wireless stations to successfully communicate, they must
have the same gateway IP address.
Indicates whether the current IP address was obtained from
a DHCP server on the network. Possible values include
Enabled, Disabled, and DHCP Server unreachable,
resetting back to Default IP.
Description
Displays the wireless channel that is currently is use
Displays the current wireless mode (for example, 802.11g)
Displays the current access point mode. Possible values
include Disabled, AP, and Client/Repeater.
Displays the current bridge mode. Possible values include
Disabled, PTP, and PTMP.