70
C
4: C
HAPTER
ONFIGURING THE
W
S
IRELESS
TATIONS
Figure 36 Automatic Certificate Request Setup Wizard
12 Verify that your certificate authority is selected, and then click Next.
13 Review the policy change information, and then click Finish.
14 From the Start menu, click Run, and then enter
appears.
15 Enter secedit /refreshpolicy machine_policy
It may take a few minutes for this command to take effect.
Setting Up the Internet Authentication Service (RADIUS)
1 From the Start menu, point to Programs > Administrative Tools, and then
click Internet Authentication Service. The Internet Authentication Service
screen appears.
2 Right-click Clients, and then click New Client.
3 Type a name for the Access Point, and then click Next.
4 Type the address or name of the Access Point, and then set the shared
secret. This shared secret must be the same as the shared key that you
specified on the Access Point.
5 Click Finish.
. A command prompt
cmd