Connecting The Bridge; Connecting To A Serial Device - 3Com 3CRWE675075 - 11a/b/g Wireless LAN Workgroup Bridge User Manual

14 C
HAPTER
Connecting the
Bridge
Connecting to a
Serial Device
Downloaded from www.Manualslib.com
2: I B
NSTALLING THE RIDGE
The Bridge has power, Ethernet, and serial ports, as shown in Figure 8.
Before connecting the Bridge to an Ethernet device, connect the power.
Figure 8 Connecting the Power
P ower
C able
The Bridge can also be connected to a serial device, as shown in Figure 9.
Serial cables come with a variety of connector sizes. If your connector is
large and prevents the cradle from being attached to the Bridge, remove
the end cap on the cradle. This allows the connector to extend through
the cradle.
Figure 9 Connecting a Serial Cable
manuals search engine
E thernet
C able
S erial C able