Operation And Monitoring With Acs - Siemens RDG200KN Basic Documentation

5.2.2 Operation and monitoring with ACS

ACS
Parameter settings in ACS
Notes
A6V11545892_en--_a
In the ACS program, select Plant ➙ Open to open the plant.
To open monitoring and operation, select Applications ➙ Plant operation.
The ACS tool supports parameter settings even during normal operation.
To change a control parameter, double-click the parameter in Standard popcard for
the settings.
● Make sure you are logged in with sufficient access right.
● Only control parameters can be changed, not the application!
Supported KNX tools
5
ACS tool
123 | 150