Siemens RDG200KN Basic Documentation page 105

Obj Object name
53 Fan output 0...100 %
Indicates the current fan speed as a value 0...100 %.
Speed Fan output (physical KNX
value)
OFF 0 %
1 33 %
2 66 %
3 100 %
54 Fan speed 1 Off
55 (receive) On
56 Fan speed 2
(receive)
Fan speed 3
(receive)
The fan can be set to a specified speed by a KNX control unit
when manual fan operation is enabled.
57 Fan speed 1 Off
58 (send) On
59 Fan speed 2
(send)
Fan speed 3
(send)
Indicate the state of the relay outputs.
60 Outside Temperature
temperature
The outside temperature measured by a KNX sensor can be
displayed on the thermostat, if P009 "Additional display
information" is set to 2 (outside temperature).
61 Heating, control 0...100 %
value continuous
Indicates the position of the heating actuator of the first stage.
E.g., 2-pipe with electric heater application: Output of heating coil.
62 Heating, control 0...100 %
value continuous,
seq 2
Indicates the position of the heating actuator of the second stage.
E.g., 2-pipe with electric heater application: Output of the electric
heater.
63 Cooling, control 0...100 %
value continuous
Indicates the position of the cooling actuator of the first stage.
E.g., 2-pipe with electric heater application: Output of the cooling
coil.
64 Cooling, control 0...100 %
value continuous,
seq 2
Indicates the position of the cooling actuator of the second stage.
E.g., 2-stage changeover application: Output of the second
cooling stage.
A6V11545892_en--_a
Function Type/ Flags
length
5.001 CRT
1 byte
(0)
(84)
(186)
(255)
1.001 CWU
1 bit
1.001 CRT
1 bit
9.001 CWU
2 bytes
5.001 CRT
1 byte
5.001 CRT
1 byte
5.001 CRT
1 byte
5.001 CRT
1 byte
Communication objects (S-Mode)
Obj Object name
65 Heating, control Off
value status On
Indicates the control status of heating actuator of the first stage
66 Heating, control Off
value status seq 2 On
Indicates the control status of heating actuator of the second
stage.
67 Cooling, control Off
value status On
Indicates the control status of cooling actuator of the first stage.
68 Cooling, control Off
value status seq 2 On
Indicates the control status of cooling actuator of the second
stage.
69 Heating and Off
cooling, control
On
value status
Indicates the control status of heating and cooling actuator of the
first stage.
70 Heating and Off
cooling, control On
value status seq2
Indicates the control status of heating and cooling actuator of the
second stage.
71 Heating and 0...100 %
cooling, control
value continuous
Indicates the position of the heating and cooling actuator of the
first stage.
72 Heating and 0...100 %
cooling, control
value continuous
seq 2
Indicates the position of the heating and cooling actuator of the
second stage.
73 Control Off
dehumidification On
Indicates the control status of the dehumidification.
74 Control Off
humidification On
Indicates the control status of the humidification.
Functions
4
Function Type/ Flags
length
1.011 CRT
1 bit
1.011 CRT
1 bit
1.011 CRT
1 bit
1.011 CRT
1 bit
1.011 CRT
1 bit
1.011 CRT
1 bit
5.001 CRT
1 byte
5.001 CRT
1 byte
1.011 CRT
1 bit
1.011 CRT
1 bit
105 | 150