Can Interface - Analog Devices EZ-KIT Lite ADSP-BF538F System Manual

Example code is provided in the EZ-KIT Lite installation directory to
demonstrate how to program flash memory.
Table 1-4 shows a sample value for the asynchronous memory configura-
tion register,
EBIU_AMBCTL0
Table 1-4. Asynchronous Memory Control Register Setting Example
Register
EBIU_AMBCTL0

CAN Interface

The Controller Area Network interface contains a Philips TJA1041
high-speed CAN transceiver. The
error and power-on indication output (
nects to the receive data output (
data input (
TXD
The CAN interface can be disconnected from the processor by turning
positions though
1
signals can be used elsewhere on the board. See
(SW2)" on page 2-10
The CAN interface contains two 4-position modular connectors (see
"CAN Connectors (J5 and J11)" on page
Example programs are included in the EZ-KIT Lite installation directory
to demonstrate CAN circuit operation.
ADSP-BF538F EZ-KIT Lite Evaluation System Manual
.
Value
0x7BB07BB0
RXD
).
of the switch
4 SW2
for more information.
Using ADSP-BF538F EZ-KIT Lite
Function
Timing control for banks 1 and 0
programmable flag connects to the
PD9
). The
ERR PC1
), and connects to the transmit
PCO
. When in the
OFF
"CAN Enable Switch
2-21).
of the processor con-
position, the
OFF
1-11