Analog Devices EZ-KIT Lite ADSP-BF538F System Manual page 27

Default Configuration
The EZ-KIT Lite evaluation system contains ESD (electrostatic discharge)
sensitive devices. Electrostatic charges readily accumulate on the human
body and equipment and can discharge without detection. Permanent
damage may occur on devices subjected to high-energy discharges. Proper
ESD precautions are recommended to avoid performance degradation or
loss of functionality. Store unused EZ-KIT Lite boards in the protective
shipping package.
When removing the EZ-KIT Lite board from the package, handle the
board carefully to avoid the discharge of static electricity, which may dam-
age some components.
switches, connector locations, and LEDs used in installation. Confirm
that your board is in the default configuration before using the board.
Figure 1-1. EZ-KIT Lite Hardware Setup
1-4
Figure 1-1 shows the default jumper settings,
ADSP-BF538F EZ-KIT Lite Evaluation System Manual