Using Adsp-Bf538F Ez-Kit Lite - Analog Devices EZ-KIT Lite ADSP-BF538F System Manual

1 USING ADSP-BF538F EZ-KIT
LITE
This chapter provides specific information to assist you with development
of programs for the ADSP-BF538F EZ-KIT Lite evaluation system.
The information appears in the following sections.
• "Package Contents" on page 1-3
Lists the items contained in the ADSP-BF538F EZ-KIT Lite
package.
• "Default Configuration" on page 1-3
Shows the default configuration of the ADSP-BF538F EZ-KIT
Lite.
• "Installation and Session Startup" on page 1-5
Instructs how to start a new or open an existing ADSP-BF538F
EZ-KIT Lite session using VisualDSP++.
• "Evaluation License Restrictions" on page 1-7
Describes the restrictions of the VisualDSP++ demo license
shipped with the EZ-KIT Lite.
• "Memory Map" on page 1-7
Defines the ADSP-BF538F EZ-KIT Lite board's memory map.
• "SDRAM Interface" on page
Defines the register values to configure the on-board SDRAM.
• "Flash Memory" on page 1-10
Describes the internal and external flash memory.
ADSP-BF538F EZ-KIT Lite Evaluation System Manual
1-8·
1-1