Table of Contents
Advertisement
A-14
A
A: CLI C
PPENDIX
OMMAND
set snmp community
<community_name>
set snmp
trap_community
<name>
set system
set syslog <IP_address>
loglevel [level]
D
ESCRIPTION
address [IP_address]
access [RO | RW]
Modifies parameters for an SNMP authorized user. The community name and IP
address of SNMP requests from managers on the network must match the list,
which you can see using list snmp communities.
Parameters
Description
<community_name> Group designation authorizing SNMP requests.
address
IP address of the SNMP manager, in the form nnn.nnn.nnn.nnn
access
Determines what type of access to SNMP MIBs the added user will have.
Options are Read Only (RO) and Read Write (RW).
address <IP_address>
Changes the IP address pairs that are allowed to receive SNMP traps. You can see
the list of authorized trap communities and addreses with the list snmp
trap_communities command.
Parameters
Description
<name>
Group name defining who can receive SNMP traps.
address
IP address of the SNMP manager, in the form nnn.nnn.nnn.nnn
name ["name"]
location ["location"]
contact ["contact info"]
Specifies system contact information, which is displayed using show system. The
user name is the remote account name. Location, name and contact names are
limited to 64 characters..
Parameters
Description
name
A name identifying the user to the system.
location
The location of the user.
contact
The information contact for the user.
Sets the error reporting level for syslog entries that will be sent to the specified IP
address. You must have previously defined this syslog IP address using add syslog.
There are five levels of logging:
CRITICAL - a serious system error, which may effect system integrity
UNUSUAL - an abnormal event, which the system should recover from
COMMON - a regularly occurring event that is not frequent
VERBOSE - a regular periodic event, e.g. a routing update message
DEBUG - for debugging only
Advertisement
Table of Contents
