Show Filter <Filter_Name >; Show File <Filename>; Show Ethernet Counters; Show Crash_Vector - 3Com HomeConnect 3CP3647 Cli User's Manual

show command

show crash_vector

show date

show file <filename>
show filter
<filter_name >
show ethernet
counters
Displays the settings for Command History Depth, and the Current Prompt.
You can modify the history depth using set command history, and alter the
prompt using set command prompt. Prompts can hold a maximum of 64
characters. For example:
History Depth:
Current Prompt:
Local Prompt:
Displays debug information saved after a system crash.
Displays the system date, time, and uptime. For example:
System Date:
System UpTime:
Displays the contents of a text file.
protocols [BR-ETH]
Displays the filter rules, based on the protocol options specified. The filter name
MUST be a filter file, as listed using list filters.
BR-ETH - Ethernet bridge data filter rules
BR-ETH - CALL - Ethernet bridge call filter rules
Displays counters for the ethernet interface.

INPUT COUNTERS

Octets - bytes received
Ucast - Unicast packets received
MultiCast - Multicast packets received
BroadCast - broadcast packets received
Discards - Number of inbound packets which were chosen to be discarded
even though no errors had been detected to prevent their being deliverable to
a higher-layer protocol. One possible reason for discarding such a packet could
be to free up buffer space.
Errors - For packet-oriented interfaces, the number of inbound packets that
contained errors preventing them from being deliverable to a higher-layer
protocol. For character-oriented or fixed-length interfaces, the number of
inbound transmission units that contained errors preventing them from being
deliverable to a number of inbound transmission units that contained
higher-layer protocol.
Unknown Prot - unknown protocol in packet
10
3COM-DSL>
3COM-DSL>
09-FEB-2107 15:06:10
2d 08:37:54
CLI Commands A-17