Show Snmp Settings; Show System; Show User <Name> Settings; Telnet - 3Com HomeConnect 3CP3647 Cli User's Manual

Adsl modem ethernet
Hide thumbs Also See for HomeConnect 3CP3647:
Table of Contents

Advertisement

A-20
A
A: CLI C
PPENDIX
OMMAND

show snmp settings

show system

show user <name>
settings

TELNET

telnet
<ip_name_or_addr>
telnet <ip_addr>
TCP_port <number>
UPDATE
update software ftp
<filename>
D
ESCRIPTION
Displays SNMP settings, which you can modify using enable or disable snmp
authentication traps commands.
Authentication Traps - ENABLED (default) or DISABLED
Displays system information.
System Descriptor - for example:
3Com HomeConnect™ Remote 810 V1.0.0, Built on Oct 31 1996 at 11:33:05.
Object ID - identifies this system to SNMP managers
System UpTime - time the system has been running since last boot
System Contact - modify using set system
System Name - modify using set system
System Location - modify using set system
System Services - for example, Internet End To End Applications
System Version - loaded version of the system software
Displays the parameters defined for the specified TELNET user. You can use list
users to see which users are defined.
TELNET commands are available to users who dial in, and whose type is network
(type parameter in add user), whose host_type is prompt (host_type parameter in
set login user), and whose login_service is TELNET (login_service parameter in set
login user).
Establishes a TELNET client session with the specified IP address.
Establishes a TELNET client session with the specified IP address using the specified
TCP port number. It works just like the TELNET command, except you also specify
the TCP port number to be used. The default TCP port number is 23.
The Update Software FTP and Update Software TFTP commands allow you to
utilize the 3Com HomeConnect ADSL Modem Ethernet FTP or TFTP clients to
obtain and install the new operational software. You can access these commands
directly from the serial console CLI session or through TELNET.
To update the software using the FTP command, use the CLI command:
server <ip_addr>
path <path>
username <username>
password <password>
To update the software using the TFTP command, use the CLI command:

Advertisement

Table of Contents
loading

Table of Contents