List Syslog; List Tftp Clients; List Users; Paused Commands - 3Com HomeConnect 3CP3647 Cli User's Manual

A-10 A A: CLI C
PPENDIX OMMAND

list syslog

list tftp clients

list users

PAUSED COMMANDS

PING

ping
<ip_name_or_addr>

REBOOT

D
ESCRIPTION
Displays IP addresses which get syslog entries from the system. See add syslog for
more information, and delete syslog command to remove entries. This command
shows:
Syslog - IP address to which syslog entries will be sent
Log Level - reporting level of entries to send
Msg Count - current number of messages sent since system bootup
Also see list facilities and set facilities commands, which let you view and change
log reporting levels for each system facility.
Displays IP addresses of all users who allowed to use the Trivial File Transfer
Protocol (TFTP) to connect to the system. You must have used add network service
to add TFTP support to the system and used add tftp client to authorize users to
connect.
Lists all users, showing:
User Name - user designation you specified using add user
Login Service - The service used to login to the network (i.e. TELNET).
Status - link status: ACTIVE, INACTIVE or DISABLED
More (or CR)
Quit
output [output_filename]
count [count]
interval [interval]
timeout [timeout_value]
Sends an ICMP echo request to a remote IP host. A reply from the pinged address
indicates success.
Parameters
<ip_name_or_address>
output
count
interval
timeout
Reboot the system. If you have made any configuration changes, be sure to save
all before rebooting. Also see the delete configuration command.
Continue printing
Cancel rest of output
Description
IP address in dotted notation, or host name of remote system.
A file name to direct output to.
Number of ICMP echo requests to send.
Number of seconds to wait between sending each request.
Number of seconds to wait for an echo response to return.