Set User <User_Name>; Set Time <Time>; Show Adsl Configuration; Show Adsl Performance - 3Com HomeConnect 3CP3647 Cli User's Manual

set time <time>
set user <user_name>

SHOW

show adsl
configuration

show adsl performance

Sets the system time, and leaves the date unchanged. Use show date to see what
the current settings are. The format is: hh:mm:ss. The seconds field is optional.
message ["message"]
password [password]
session_timeout [seconds]
tcp_port [tcp_port]
terminal_type
Modifies user parameters.
Parameters Description
<user_name> Name of user, previously defined using add user. Limit of 32 char acters.
message Message presented to a dial-in user.
password User's password, up to 15 ASCII characters. Value is required.
session_timeout Interval before timing out a session.
tcp_port TCP Port number for the Telnet session.
Terminal_type The type of the terminal. This is an alphanumeric string, of up to 64
characters.
Show commands display details about system entities.
Displays the current status of the command-line configurable ADSL chipset items.
Option register - the OPTN CMV value to on the next reset of the ADI chipset.
PSDM config register - the ADSL maximum power spectral density setting.
Displays ADSL error statistics. The following statistics and counters are collected in
15-minute interval bins:
Loss of framing errors
Loss of power errors
Errored seconds
Loss of signal errors
The statistics are displayed for the following time periods:
Current 15-minute interval
Previous 15-minute interval
Current day
Previous day
Total
CLI Commands A-15