Table of Contents
Advertisement
H
C
ANDLING
ARE
Warning!
Care must be taken not to touch the exposed circuitry with your fingers when
handling the board. Though it will not damage the circuitry, it is possible that
small amounts of oil or perspiration on the skin could have enough conductivity to
cause the contents of CMOS RAM to become corrupted through careless handling,
resulting in CMOS resetting to factory defaults.
E
G
ARTH
ROUND
Warning!
All mounting standoffs (four on PC/104 boards, eight on EBX and EPIC boards)
should be connected to earth ground (chassis ground). This provides proper
grounding for EMI purposes.
Technical Support
If you are unable to solve a problem after reading this manual, please visit the VL-EPM-24
product support web page below. The support page provides links to component datasheets,
device drivers, and BIOS and PLD code updates.
The VersaTech KnowledgeBase contains a wealth of technical information about VersaLogic
products, along with product advisories. Click the link below to see all KnowledgeBase articles
related to the VL-EPM-24.
If you have further questions, contact VersaLogic Technical Support at (541) 485-8575.
VersaLogic support engineers are also available via e-mail at Support@VersaLogic.com.
VL-EPM-24 Reference Manual
R
EQUIREMENT
VL-EPM-24 Support Page
http://www.versalogic.com/private/tigersupport.asp
VersaTech KnowledgeBase
Introduction
5
Advertisement
Table of Contents
