Section 3 - Handling, Storage, Installation And Reassembly; Figure 3 - Warning - York YHAU-CW Manual

FORM 155.31-ICOM2.EN.UL
ISSUE DATE: 12/21/2018
SECTION 3 – HANDLING, STORAGE, INSTALLATION AND REASSEMBLY

FIGURE 3 - WARNING

Rigging and lifting should only be done by
a professional rigger in accordance with a
written rigging and lifting plan. The most
appropriate rigging and lifting method
will depend on job specific factors, such as
the rigging equipment available and site
needs. Therefore, a professional rigger
must determine the rigging and lifting
method to be used, and it is beyond the
scope of this manual to specify rigging
and lifting details.
JOHNSON CONTROLS
This chiller is for air conditioning or a cooling manu-
facturing process. Transport, store, and use this chiller
under the following conditions:
Installation location:
Ambient temperature: 50 ~ 104 °F
Humidity:
Altitude:
If the temperature in the plant room drops below 50 °F,
you must have the cold ambient option.
LD18119
Indoor, non-explosion area
10 ~ 90% (RH%)
3333 feet or lower
21
3