Vibration And Isolation Details; Figure 9 - Vibration And Isolation Details - York YHAU-CW Manual

FORM 155.31-ICOM2.EN.UL
ISSUE DATE: 12/21/2018

VIBRATION AND ISOLATION DETAILS

Before you install the unit, fit rubber vibration isolators
to the unit base as shown in Figure 9 on page 29.
Use liners to adjust the levelness of the unit. For unit
dimensions, see Table 7 on page 38, Table 8 on page
39. Table 9 on page 40, and Table 10 on page
41.
Nut
Washer
Foundation
Bolt

FIGURE 9 - VIBRATION AND ISOLATION DETAILS

JOHNSON CONTROLS
SECTION 3 – HANDLING, STORAGE, INSTALLATION AND REASSEMBLY
Base
Rubber Vibration
Isolator
Sole Plate
Foundation Bolt
Nut
Rubber Vibration
Washer
Isolator
Sole Plate
Filling with
Mortar
LD19979
29
3