FORM 155.31-ICOM2.EN.UL
ISSUE DATE: 12/21/2018
Scope of Delivery
Johnson Controls scope of delivery for the upper com-
munication system covers the control panels for the
upper communication function. The customer is re-
sponsible to deliver all other related equipment: con-
centrator (HUB), installation, wiring, communication
program for the central monitoring unit, and other
relevant communication modes. See Table 15 on page
85.
TABLE 15 - SCOPE OF DELIVERY
ITEM
Control panel with
upper communication
function
Data concentrator
(HUB)
Wiring work for Ethernet
connection
Communication
program for central
monitoring unit
Connection Port for Ethernet Communication
Make sure that the Ethernet cable is plugged into the
correct port on the Control Panel. The ethernet connec-
tion port is located at the bottom left on the back of the
Control Panel.
TABLE 16 - ETHERNET INTERFACE SPECIFICATION
ITEM
Communication format
Connector shape
LED function
JOHNSON CONTROLS
CUSTOMER
X
X
X
10BASE-T/100BASE-TX
RJ-45 type modular jack connector
Active
(Green)
Link
(Green)
JCI
X
Communication protocol: Modbus TCP
Installation and wiring are included
Apply twisted pair cable
See Table 16 on page 85 and Table 17 on
page 86 for the details of the IP address,
function code, communication data ad-
dress, or other applicable communication
SPECIFICATION
Blink
No light
Blink
No light
No connection or successor job failure
SECTION 4 - TECHNICAL DATA
REMARKS
addresses.
Data sending/receiving
No data sending/receiving
Data sending/receiving via
10BASE-T/100BASE-TX
4
85