Operational Status Change Alarm - AudioCodes Mediant 800 Reference Manual

CHAPTER 7 SNMP Traps
Alarm
Major
Cleared

Operational Status Change Alarm

Alarm
OID
Description
Default Severity
Event Type
Probable Cause
Severity
Major
changed Gateway is shutting down.
to No time limit."
shutting
down
Admin
state
changed
to locked
Admin -
state
changed
to
unlocked
Table 7-25: acOperationalStateChange
1.3.6.1.4.1.5003.9.10.1.21.2.0.15
The alarm is sent if the operational state of the node changes to
disabled. It is cleared when the operational state of the node changes
to enabled.
Major
processingErrorAlarm
outOfService (71)
Condition
Operational
state changed
to disabled
Mediant 800 SBC | SNMP Reference Guide
acgwAdminStateChange
■
■
"Locked"
■
■
■
acOperationalStateChange
Text
■
"Network
element
operational state
change alarm.
■
Operational state
is disabled."
- 125 -
A network administrator
took an action to
gracefully lock the device.
No corrective action is
required.
A network administrator
took an action to lock the
device, or a graceful lock
timeout occurred.
No corrective action is
required.
A network administrator
has taken an action to
unlock the device.
Corrective Action
The alarm is cleared when
the operational state of the
node changes to enabled.
In IP systems, check for
initialization errors - in IP
systems the operational