Getting Acquainted With Audiocodes Mibs - AudioCodes Mediant 800 Reference Manual

CHAPTER 9 Getting Started with SNMP
● To delete a Trusted Manager (not the final one): This procedure assumes that there is
at least one configured read-write community. There are currently two or more
Trusted Managers. The taglist for columns for all rows in the snmpCommunityTable
are currently set to MGR. This procedure must be done from one of the existing
trusted managers, but not the one that is being deleted. Remove the appropriate row
from the snmpTargetAddrTable; The change takes effect immediately. The deleted
trusted manager cannot access the device. The agent automatically removes the row
in the snmpTargetAddrExtTable.
● To delete the final Trusted Manager: This procedure assumes that there is at least one
configured read-write community. There is currently only one Trusted Manager. The
taglist for columns for all rows in the snmpCommunityTable are currently set to MGR.
This procedure must be done from the final Trusted Manager.
i.
ii.
■
Web interface: SNMP Trusted Managers table (Setup menu > Administration tab > SNMP
folder > SNMP Trusted Managers). Click the Apply button for applying your configuration.
Use the check boxes for deleting.
■
CLI:
(config-system)# snmp settings
(snmp)# trusted-managers

Getting Acquainted with AudioCodes MIBs

AudioCodes proprietary MIBs are located in the AudioCodes subtree (OID 1.3.6.1.4.1.5003). A
classification within the subtree separates the MIBs according to the following:
■
Configuration and status MIBs – in the acBoardMibs subtree . The different MIB
modules are grouped according to different virtual modules of the device. In general, the
division is as follows (a more detailed breakdown of the MIBs is discussed below):
● acBoard MIB: proprietary traps.
● acGateway MIB: SIP control protocol specific objects. This MIB's structure is unlike the
other configuration and status MIBs.
●
acMedia MIB: DSP and media related objects. This MIB includes the configuration and
status of DSP, voice, modem, fax, RTP/RTCP related objects.
● acControl MIB: mostly MEGACO and MGCP CP related objects. A number of objects
are also related to SIP. The MIB is divided into subtrees that are common to both
Set the value of the TransportTag field on each row in the snmpCommunityTable
to the empty string.
Remove the appropriate row from the snmpTargetAddrTable; The change takes
effect immediately. All managers can now access the device. The agent
automatically removes the row in the snmpTargetAddrExtTable.
Mediant 800 SBC | SNMP Reference Guide
- 180 -