Intrusion Detection Alarms; Ids Policy Alarm - AudioCodes Mediant 800 Reference Manual

CHAPTER 7 SNMP Traps
Alarm
Alarm Text
Event Type
Probable Cause
Severity
Major
Cleared

Intrusion Detection Alarms

This section describes the alarms concerned with the device's Intrusion Detection System (IDS)
feature.

IDS Policy Alarm

Alarm
OID
Description
<Alarm Description Reason> as described above.
Quality Of Service Alarm
One of the reasons described above.
Condition
When calls rejected to IP Group
due to any of the above-
mentioned reasons.
When calls are no longer rejected
due to the above-mentioned
reasons (i.e. when none of the
above reasons prevent a route to
the IP Group from being
established).
Table 7-55: acIDSPolicyAlarm
1.3.6.1.4.1.5003.9.10.1.21.2.0.99
The alarm is sent when a threshold of a specific IDS Policy rule is crossed for
the Intrusion Detection System (IDS) feature. The alarm displays the
crossed severity threshold (Minor or Major), IDS Policy and IDS Rule, and
the IDS Policy-Match index.
The alarm is associated with the MO pair IDSMatch and IDSRule.
Mediant 800 SBC | SNMP Reference Guide
acIpGroupNoRouteAlarm
"IP Group is
temporarily
blocked.
(<name>)
Blocked
Reason:
<reason – see
Source Varbind
acIDSPolicyAlarm
- 157 -
Corrective
Text
Action
-
IPGroup
Text>"
-