Active Alarm Table Alarm - AudioCodes Mediant 800 Reference Manual

Gateway & session border controller series simple network management protocol
Hide thumbs Also See for Mediant 800:
Table of Contents

Advertisement

CHAPTER 7    SNMP Traps
Alarm
Severity
Major
Cleared

Active Alarm Table Alarm

Alarm
OID
Description
Default
Severity
Source
Varbind
Text
Condition
When
connection
to the
Upstream
Host is lost.
When
connection
to service is
available
again.
Table 7-45: acActiveAlarmTableOverflow
1.3.6.1.4.15003.9.10.1.21.2.0.12
The alarm is sent when an active alarm cannot be entered into the Active
Alarm table because the table is full.
Major
System#0<n>/AlarmManager#0
Mediant 800 SBC | SNMP Reference Guide
acHTTPProxyServiceAlarm
Text
"HTTP Proxy
1.
Ping the host. If there is no
Upstream
ping, contact your provider.
Host IP:Port
The probable reason is that
(Host #n in
the host is down.
Upstream
2.
Ping between the host and the
Group name)
device. If there is no ping, the
is OFFLINE"
problem could be a net-
work/router issue.
3.
Check that routing using the
device's (internal) routing table
is functioning correctly.
4.
Contact AudioCodes support
center (sup-
port@audiocodes.com) and
send a syslog and network cap-
ture for this issue.
-
-
acActiveAlarmTableOverflow
- 148 -
Corrective Action

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents