Ds1 Interface - AudioCodes Mediant 800 Reference Manual

CHAPTER 4 Topology MIB Objects
ifTable & ifXTable
ifHCInOctets
ifHCOutOctets
ifHCInUcastPkts
ifHCInMulticastPkts
ifHCInBroadcastPkts
ifHCOutUcastPkts
ifHCOutMulticastPkts
ifHCOutBroadcastPkts
ifLinkUpDownTrapEnable
ifPromiscuousMode
ifConnectorPresent
ifAlias
ifCounterDiscontinuityTime

DS1 Interface

The DS1 interface is applicable only to digital PSTN interfaces.
ifDescr
ifType
ifMtu
ifSpeed
ifPhysAddress
ifAdminStatus
64-bit versions of counters. Required for ethernet-like
interfaces that are capable of operating at 20 Mb/s or
faster, even if the interface is currently operating at less
than 20 Mb/s.
64-bit versions of packet counters. Required for ethernet-
like interfaces that are capable of operating at 640 Mb/s or
faster, even if the interface is currently operating at less
than 640 Mb/s.
Therefore, will be constant zero.
Set to disabled (2). Refer to [RFC 2863].
Constant False. [R/O]
Constant True.
An 'alias' name for the interface as specified by a network
manager (NVM)
As defined in IfMIB.
Table 4-2: DS1 Digital Interface
ifTable
Digital DS1 interface.
ds1(18).
Constant zero.
DS1 = 1544000, or E1 = 2048000, according to dsx1LineType
The value of the Circuit Identifier [dsx1CircuitIdentifier]. If
no Circuit Identifier has been assigned this object should
have an octet string with zero length.
Trunk's Lock & Unlock during run time. In initialization
Mediant 800 SBC | SNMP Reference Guide
Value
Value
- 23 -