Board Initialization Completed Trap; Configuration Change Trap - AudioCodes Mediant 800 Reference Manual

Gateway & session border controller series simple network management protocol
Hide thumbs Also See for Mediant 800:
Table of Contents

Advertisement

CHAPTER 7    SNMP Traps
Event

Board Initialization Completed Trap

This is the AudioCodes Enterprise application cold start trap.
Event
OID
Description
MIB
Severity
Event Type
Probable
Cause
Alarm Text

Configuration Change Trap

Event
OID
MIB
Description
access permission or incorrectly authenticated protocol message.
Categorized by the RFC as an "enterprise-specific trap".
Table 7-70: acBoardEvBoardStarted
1.3.6.1.4.1.5003.9.10.1.21.2.0.4
The alarm is sent after the device is successfully restored and initialized
following reset.
AcBoard
cleared
equipmentAlarm
Other(0)
Initialization Ended
Table 7-71: entConfigChange
1.3.6.1.2.1.4.7.2
ENTITY-MIB
The alarm is sent if a change in the device's hardware is detected, for
example, when a module is removed from the chassis.
Mediant 800 SBC | SNMP Reference Guide
authenticationFailure
acBoardEvBoardStarted
entConfigChange
- 170 -

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents