Tesla RoboStar iQ300 Manual page 107

DUST TANK - cleaning after each cleaning
 Empty the dust tank regularly.
 The dust capacity of the dust tank significantly affects the suction power of the robotic vacuum
cleaner and the quality of cleaning.

Empty the dust tank after cleaning.

If you use water to clean the dust tank, dry it carefully before reinstalling it in the robotic vacuum
cleaner.
Press the release button to remove the dust tank and empty the dirt into the waste bin.
We recommend washing the „Primary filter" with clean water every 14 days.
Clean the HEPA filter regularly according to the degree of its contamination, at least once a week,
with a dust brush or vacuum it with a standard vacuum cleaner.
 Do not clean the HEPA filter with your fingers or a brush, only with a stream of clean water (do
not use cleaning agents).
 Allow the HEPA filter to dry thoroughly, never install a wet HEPA filter in the robotic vacuum
cleaner!
 Vacuuming with a dirty HEPA filter or without a HEPA filter inserted can damage the robotic
vacuum cleaner.

We recommend replacing the HEPA filter every 6 months.
You can clean the dust tank with clean water.