Adding Mac Filtering Address Entries; Viewing Address Table Entries - TP-Link T2600G Series User Manual

Managing MAC Address Table

2.1.3 Adding MAC Filtering Address Entries

Choose the menu L2 FEATURES > Switching > MAC Address > Filtering Address and
click
Figure 2-4 Adding MAC Filtering Address Entries
Follow these steps to add MAC filtering address entries:
1) Enter the MAC Address and VLAN ID.
MAC Address
VLAN ID
2) Click Create.
Note:
• In the same VLAN, once an address is configured as a filtering address, it cannot be set as a
static address, and vice versa.
•
Multicast or broadcast addresses cannot be set as filtering addresses .

2.1.4 Viewing Address Table Entries

You can view entries in MAC address table to check your former operations and address
information.
to load the following page.
Specify the MAC address to be used by the switch to filter the received packets.
Specify an existing VLAN in which packets with the specific MAC address are
dropped.
Address Configurations
User Guide 150