Table of Contents
Advertisement
Managing System
Step 4
end
Return to privileged EXEC mode.
Step 5
copy running-config startup-config
Save the settings in the configuration file.
3.2.2 Configuring Enable Password
Follow these steps to create an account of other type:
Step 1
configure
Enter global configuration mode.
Step 2
Use the following command to create an enable password unencrypted or symmetric
encrypted.
enable admin password { [ 0 ] password | 7 encrypted-password }
Create an Enable Password. It can change the users' access level to Admin. By default, it is
empty.
0: Specify the encryption type. 0 indicates that the password you entered is unencrypted, and
the password is saved to the configuration file unencrypted. By default, the encryption type is 0.
password
contain only English letters (case-sensitive), digits and 17 kinds of special characters. The
special characters are !$%'()*,-./[]_{|}.
7: Specify the encryption type. 7 indicates that the password you entered is symmetric
encrypted, and the password is saved to the configuration file symmetric encrypted.
encrypted-password
copy from another switch's configuration file. After the encrypted password is configured, you
should use the corresponding unencrypted password to reenter this mode.
Use the following command to create an enable password unencrypted or MD5 encrypted.
enable admin secret { [ 0 ] password | 5 encrypted-password }
Create an Enable Password. It can change the users' access level to Admin. By default, it is
empty.
0: Specify the encryption type. 0 indicates that the password you entered is unencrypted, but
the password is saved to the configuration file MD5 encrypted. By default, the encryption type
is 0.
password
contain only English letters (case-sensitive), digits and 17 kinds of special characters. The
special characters are !$%'()*,-./[]_{|}.
5: Specify the encryption type. 5 indicates that the password you entered is MD5 encrypted,
and the password is saved to the configuration file MD5 encrypted.
encrypted-password
from another switch's configuration file. After the encrypted password is configured, you
should use the corresponding unencrypted password to reenter this mode.
Step 3
show user account-list
Verify the information of the current users.
: Enter an enable password. It is a string with 31 characters at most, which can
: Enter a symmetric encrypted password with fixed length, which you can
: Enter an enable password. It is a string with 31 characters at most, which can
: Enter a MD5 encrypted password with fixed length, which you can copy
User Management Configurations
User Guide
41
Hide quick links:
Advertisement
Table of Contents
