Table of Contents
Advertisement
Managing System
Auto Insatll sate....................................Stopped
4.2.6 Rebooting the Switch
Manually Rebooting the Switch
Follow these steps to reboot the switch:
Step 1
enable
Enter privileged mode.
Step 2
reboot
Reboot the switch.
Configuring Reboot Schedule
Follow these steps to configure the reboot schedule:
Step 1
configure
Enter global configuration mode.
Step 2
Use the following command to set the interval of reboot:
reboot-schedule in interval [ save_before_reboot ]
(Optional) Specify the reboot schedule.
interval
from 1 to 43200 minutes.
save_before_reboot: Save the configuration file before the switch reboots. To make this
schedule recur, you can add this part to the command.
Use the following command to set the special time of reboot:
reboot-schedule at time [ date ] [ save_before_reboot ]
(Optional) Specify the reboot schedule.
time
date
be within 30 days.
save_before_reboot: Save the configuration file before the switch reboots.
If no date is specified, the switch will reboot according to the time you have set. If the time you
set is later than the time that this command is executed, the switch will reboot later the same
day; otherwise the switch will reboot the next day.
Step 3
end
Return to privileged EXEC mode.
Step 4
copy running-config startup-config
Save the settings in the configuration file.
: Specify a period of time. The switch will reboot after this period. The valid values are
: Specify the time for the switch to reboot, in the format of HH:MM.
: Specify the date for the switch to reboot, in the format of DD/MM/YYYY. The date should
System Tools Configurations
User Guide
54
Hide quick links:
Advertisement
Table of Contents
