Configuring The System Time - TP-Link T2600G Series User Manual

Managing System

2.2.3 Configuring the System Time

Follow these steps to configure the system time:
Note:
The mode of Synchronize with PC's Clock does not support CLI command.
Step 1 configure
Enter global configuration mode.
Step 2 Use the following command to set the system time manually:
system-time manual time
Configure the system time manually.
time
value of the year ranges from 2000 to 2037.
Use the following command to set the system time by getting time from the NTP server.
Ensure the NTP server is accessible. If the NTP server is on the internet, connect the switch to
the internet first.
system-time ntp { timezone } { ntp-server } { backup-ntp-server } { fetching-rate }
timezone
The detailed information of each time-zone are displayed as follows:
UTC-12:00 —— TimeZone for International Date Line West.
UTC-11:00 —— TimeZone for Coordinated Universal Time-11.
UTC-10:00 —— TimeZone for Hawaii.
UTC-09:00 —— TimeZone for Alaska.
UTC-08:00 —— TimeZone for Pacific Time (US Canada).
UTC-07:00 —— TimeZone for Mountain Time (US Canada).
UTC-06:00 —— TimeZone for Central Time (US Canada).
UTC-05:00 —— TimeZone for Eastern Time (US Canada).
UTC-04:30 —— TimeZone for Caracas.
UTC-04:00 —— TimeZone for Atlantic Time (Canada).
UTC-03:30 —— TimeZone for Newfoundland.
UTC-03:00 —— TimeZone for Buenos Aires, Salvador, Brasilia.
UTC-02:00 —— TimeZone for Mid-Atlantic.
UTC-01:00 —— TimeZone for Azores, Cape Verde Is.
UTC
: Specify the date and time manually in the format of MM/DD/YYYY-HH:MM:SS. The valid
: Enter your local time-zone, which ranges from UTC-12:00 to UTC+13:00.
—— TimeZone for Dublin, Edinburgh, Lisbon, London.
System Info Configurations
User Guide 32