Using The Y-Cable; Using The Vivo 2 With The Trolley - Breas Vivo 2 User Manual

It does not protect against environmental impact such as shock, from rain or
snowfall.
6.6.8

Using the Y-Cable

The Y-cable is used for connecting the Vivo 2 to both mains and external DC at the
same time. see 5.3 Connecting the Vivo 2 to Power Supply, page 51. When both power sour-
ces are available, the mains will be used.
6.6.9

Using the Vivo 2 with the Trolley

This section describes how to use the Vivo 2 and a trolley with mounting bracket.
Mount and dismount the Vivo 2 as shown in the picture:
The bottom plate is mounted to the trolley using four screws.
Before mounting the bottom plate, the tilt bar must be dismounted:
Doc. 007229 Y-2
1 2
1
How to Use the Vivo 2 71
Vivo 2 User's Manual