How To Use The Vivo 2 55; Switch On The Vivo 2; Start The Treatment - Breas Vivo 2 User Manual

6 How to Use the Vivo 2
For a summary description of the means of initiating and terminating the inspiratory
phase in each mode of the ventilator, please refer to 4.1 Treatment Modes.
6.1

Switch On the Vivo 2

1 Make sure that the power supply is connected.
2 Press the On/Off button.
⇒The Vivo 2 is now in standby
mode with the display turned on.
6.2

Start the Treatment

WARNING!
Risk of Asphyxia or Personal Injury
Using incorrect settings may cause personal injury or severe medical conditions, such
as hypercarbia, producing arterial acidemia.
The therapy settings shall be based on a physician's description. Changes to settings
must be made by authorized clinical personnel only.
1 Make sure that the Vivo 2 is in Standby mode.
2 Press and hold the On/Off button
until the Starting Treatment progress
bar is filled.
⇒The Vivo 2 now performs a func-
tion test indicated by a short beep
and then starts the treatment.
Check that the self test is per-
formed successfully, this is indi-
cated by:
Doc. 007229 Y-2
• A short beep indicating suc-
cessful alarm signalling
• The alarm LED first lights
yellow, then red
• The audio pause LED lights
yellow
• In about a second, both LEDs
are turned off

How to Use the Vivo 2 55

Vivo 2 User's Manual