5
Prepare the Vivo 2 for Use
5.1
Checking the Vivo 2 before First Use
Before using the Vivo 2, perform the following checks.
1
Ensure that you have the equipment mentioned in 3.1 Main Components, page 27
2 Ensure that the equipment is in good condition.
3 Check that the air inlet filters are
installed.
5.2
Placing the Vivo 2
WARNING!
Read the chapter 2.3 Environment — Warnings and Precautions, page 17 carefully to make
sure all conditions are met and considered.
1
Place the Vivo 2 on a solid, flat sur-
face. The Vivo 2 should be placed
lower than the patient in order to
prevent the device from falling on
the patient, as well as preventing
condensed water from reaching the
patient.
50 Prepare the Vivo 2 for Use
Vivo 2 User's Manual
Doc. 007229 Y-2