Vte (Tidal volume, expiratory) is the expired tidal volume for each breath.
• % in TgV
Percentage of breaths within the target volume window.
• Rise Time
Rise Time displays the duration of the pressure increase during the inspiration phase.
• SpO2
SpO
ured by the SpO
This value is only displayed if the SpO
Displayed ranges: According to the manufacturer's specifications.
• Pulse Rate
Pulse Rate displays the patients pulse rate as measured by the SpO2 module.
This value is only displayed if the SpO
Displayed ranges: According to the manufacturer's specifications.
6.5.2
Treatment Values Monitored by External Equipment
Monitoring of Expiratory CO
For monitoring expiratory CO
patient circuit.
The device shall comply with ISO 80601-2-55.
Monitoring of Oxygen Saturation
For monitoring the patient air oxygen saturation, an external monitoring device shall be
connected to the patient circuit.
The device shall comply with ISO 80601-2-55 and have a high oxygen level alarm.
6.6
Using Accessories
This section describes how to use accessories provided by Breas Medical.
6.6.1
Using the Attachable Humidifier
WARNING!
Read the section 2.6 Humidification and Heating — Warnings and Precautions, page 21
before using the Vivo 2 with the attachable humidifier.
Doc. 007229 Y-2
(Saturation of Peripheral Oxygen) displays the patient's oxygen saturation. as meas-
2
module.
2
2
module is connected.
2
module is connected.
2
2
, an external monitoring device shall be connected to the
How to Use the Vivo 2 59
Vivo 2 User's Manual