Stop The Treatment; Switch Off The Vivo 2 - Breas Vivo 2 User Manual

If the function test beep absents, take
the Vivo 2 out of use and contact
your supplier of the Vivo 2 e.
6.3

Stop the Treatment

1 Press and hold the On/Off button
until the Stopping Treatment progress
bar is filled.
⇒A request for a complementary
action is now displayed for stop-
ping the treatment. If no comple-
mentary action is taken within 6
seconds, the Vivo 2 reverts to nor-
mal operation.
2 Do one of the following:
• Press the Mute Alarm but-
• Press Ramp (b) for a
6.4

Switch Off the Vivo 2

1 Make sure that the treatment is stopped and the Vivo 2 is in Standby mode.
2 Press the On/Off button.
⇒When the message "Do you want
to turn off the ventilator?" is dis-
played, confirm by pressing the
Mute Alarm button within 6 sec-
onds. Otherwise, the Vivo 2 will
revert to standby mode.
56 How to Use the Vivo 2
Vivo 2 User's Manual
ton (a). (Always available.)
ramped stop. (Available if a
Ramp Down time has been
specified.)
a
Doc. 007229 Y-2