Electricity - Warnings And Precautions - Breas Vivo 2 User Manual

Always use the therapeutic pressure setting, as individually determined with the con-
figuration of the equipment and accessories.
Proper placement and positioning of the patient interface is critical to the consistent
operation of this equipment.
Handle the Vivo 2 with care.
Make sure to place and pack the device in a way that prevents unintentional start of
the machine.
Do not use the Vivo 2 with nitric oxide, helium or helium mixtures. This may affect
patient air flow and volume measurements.
2.2 Electricity — Warnings and Precautions
WARNING!
Risk of Electric Shock
High voltage contact may cause cardiac arrhythmia.
• Do not operate the Vivo 2 if it has a damaged power cord, power supply or casing.
• To avoid electrical shock, only clean the Vivo 2 according to instructions in this
manual. Do not soak or immerse the Vivo 2 into any fluids.
• Use the approved power supply units only.
Use of unapproved power supply units may compromise the electrical isolation
and lead to risk of electric shock.
• Do not use more than one multiple portable socket-outlet or extension cord.
If a multiple portable socket-outlet is used, it must not be placed on the floor.
• The operator must not touch accessible contacts of connectors and the patient
simultaneously.
• Nurse Call must only be connected to a safety extra low voltage system with an
isolation from mains voltage which complies with the requirements of IEC 60601-
1.
Doc. 007229 Y-2
Safety Information 15
Vivo 2 User's Manual