Interface Description; Troubleshooting - 3Com 4007 Getting Started Manual

Interface Description

The screen for the embedded Web Management
applications is divided into three areas (Figure 21):
Tabs panel — At the top of the Web
Management screen, the Tabs panel has three
tabs:
WebConsole tab — When you select this tab,
the menu tree lists folders for the parameters
that you can configure for the device to which
you are connected.
DeviceView tab — When you select this tab,
you see an image of the device. You can config-
ure some system and module parameters from
this view.
Help tab — When you select this tab, the
menu tree lists the Help configuration form and
several links to 3Com support sites. The menu
tree also displays links to the Help Contents and
Index. Until you install and configure Help,
these links connect you to the Help configura-
tion form.
Menu tree — The menu tree frame at the left of
the interface lists the menu options. Many of these
options are the same as those found in the
Administration Console command line interface.
Configuration form icons — Click a folder to
view the menu options, which appear as config-
uration form icons. Click a form icon to view the
associated form in the workspace.
Telnet icons — To configure system parameters
that are not supported through the WebCon-
sole, click a Telnet icon on the menu tree to
launch a Telnet session to the Administration
Console on the device.
Workspace — The workspace frame of the
interface displays the configuration form for the
menu option that you select.

Troubleshooting

This section covers the following topics:
Web Management and Internet Explorer
Improving DeviceView
Improving DeviceView Download Speed
Enabling Status Log E-mail Options on Internet
Explorer
Web Management and Netscape Navigator
Troubleshooting the Web Management Software
Examples of Good and Problematic CLASSPATH
Settings
Additional Resources for Solving Problems
Web Management Tools 49