Setting Up The Form-Specific Help Files; Embedded Web Management Applications - 3Com 4007 Getting Started Manual

48 C 5: M
HAPTER ANAGEMENT

Setting Up the Form-specific Help Files

To access Help, install the Help files on your
workstation using Help Files Install or Typical in the
installation wizard. See "Windows Installation" or
"UNIX Help Installation".
The first time that you access Help, the system
displays the Help configuration form.
To configure the location of the Help files:
In the banner of the Web Management opening
1
screen, select the Help tab.
The Help Server configuration form appears.
In the Help Installation URL box of the form, type the
2
URL for the Help files. Do not end the URL with a
slash (/) character.
Click Apply.
3
The system displays a message that the configuration
has been successful.
To link the Help to Web Management on the Web-
4
Console opening screen, select any item in the menu
tree and then click the Help button on the form.
Help is now configured for your system.
To access Help on any form, click the form's Help but-
5
ton.
The banner at the top of each Help page and the row
of links at the bottom of each Help page provide
access to the Start page (containing Web Manage-
ment overview information), Contents, Index, Techni-
cal Support, and the 3Com Corporation home page.
T
OOLS

Embedded Web Management Applications

You can access these embedded Web Management
applications from the Tabs panel of the opening
screen (Figure 21):
WebConsole (including configuration forms and
wizards)
DeviceView
Help configuration form and 3Com support links
Figure 21 Parts of the Web Management Opening Screen
The Switch 4007 software and management
interfaces are based on CoreBuilder
technology. In Switch 4007 software releases 3.0.0
and 3.0.5, the prompts and displays in all interfaces
may indicate this heritage.
® 9000 switch