Removing The Fan Tray From A Chassis - 3Com 4007 Getting Started Manual

Removing the Fan Tray from a Chassis

The Switch 4007 chassis contains one fan tray. The
fan tray contains four fans.
Fans in the power supplies help to ventilate the
Switch, but they are not designed to act as a
substitute for the dedicated fan tray.
To remove the fan tray from Switch 4007 chassis,
follow these steps:
Using a flat-blade screwdriver, loosen the two
1
spring-loaded screws that attach the fan tray to the
front of the chassis (Figure 26).
Figure 26 The Two Spring-loaded Screws on the Fan Tray
Spring-loaded
screw
Fan tray
handle
Spring-loaded
screw
9
8
7
6
5
4
3
2
1
Removing and Replacing a Fan Tray
Face the front of the chassis, grasp the handle on the
2
fan tray, and firmly pull the fan tray toward you
(Figure 27).
Figure 27 Removing the Fan Tray from the Chassis
Spring-loaded
screw
Fan tray
handle
Spring-loaded
screw
CAUTION: Before you completely remove the fan
tray, wait until all fans in the fan tray stop rotating.
Carefully pull the fan tray straight out from the
3
chassis.
57
9
8
7
6
5
4
3
2
1