Nstalling The; Switch; Site Requirements For The Switch 4007 - 3Com 4007 Getting Started Manual

I

NSTALLING THE

3
This chapter contains the following topics:

Site Requirements for the Switch 4007

Preinstallation Guidelines
Installing the Chassis
Figure 16 summarizes the installation procedure.
For a Switch 4007 starter kit, you can simplify
the installation proceedure because the chassis is
pre-configured with one power supply, one
management module, one switch fabric module,
and two interface modules.
S 4007
WITCH
Figure 16 Switch 4007 Installation Procedure
Administer and Operate
the Switch
• Command Reference Guide
• Implementation Guide
12
Troubleshoot Problems
• Command Reference Guide
• Implementation Guide
11
Configure the Switch for
Management
• Command Reference Guide
• Implementation Guide
10
Power On the Switch
• Chapter 4 (In this guide)
9
Install Interface Modules
• Interface module quick start or
getting started guides
• Interface module user guides
(if available)
8
Determine Site Requirements
• Chapter 3 (In this guide)
Unpack the Switch 4007
1
Chassis
• "Unpacking Instructions"
(In this guide)
Install the Chassis and
Optional Devices
• Chapter 3 (In this guide)
9
8
Install a Power Supply
7
• 7-Slot Chassis Power Supply
6
5
4
3
2
1
Install a Power Cable

Switch 4007

• 7-Slot Chassis Power Supply
Install an EME Management
Module
• Enterprise Management Engine
Quick Start Guide
Install a Switch Fabric
Module
• Switch fabric module quick
start or getting started guides
• Switch fabric module
7
user guides (if available)
2
3
Installation Guide
4
Installation Guide
5
6