6020HRJ/8030J User's Manual
CHAPTER 4:
MAINTENANCE AND REPAIR
In This Section:
• Maintenance ....................................................... 4-1
• Fuse Replacement .............................................. 4-1
• Troubleshooting ................................................. 4-2
4.1.
Maintenance
This solid state servo controller requires no maintenance. If it is desired, the balance can
be checked as mentioned in Section 3.4.3. at three or six month intervals. The PC card
and heat sinks can be checked for an accumulation of dirt if operated in a dirty
environment.
4.2.
Fuse Replacement
The replacement of fuses are as follows:
-
6020HRJ, F1 should be rated 10A (slow blow).
-
8030J, F1 should be rated 15A (slow blow).
-
F2 for both amplifiers should be rated 20A (slow blow).
Version 1.1
Aerotech, Inc.
Maintenance and Repair
4-1