Routing Protocol; Display Commands Of The Routing Table - 3Com 3031 Command Reference Manual

6
Display Commands of
the Routing Table
display ip routing-table
R P
OUTING
For the specific examples and parameter explanation of VPN instance, refer to the
"MPLS" module of this manual.
Syntax
display ip routing-table
View
Any view
Parameter
None
Description
Using the display ip routing-table command, you can view the routing table
summary.
This command views routing table information in summary form. Each line
represents one route. The contents include destination address/mask length,
protocol, preference, cost, next hop and output interface.
Only current used route, i.e., best route, is displayed via the display ip
routing-table command.
Example
View the summary of current routing table.
<3Com>3Com display ip routing-table
Routing Table: public net
Destination/Mask
1.1.1.0/24
serial1/0/0
1.1.1.1/32 DIRECT
2.2.2.0/24 DIRECT
serial2/0/0
2.2.2.1/32 DIRECT 0
3.3.3.0/24 DIRECT 0
ethernet1/0/0
3.3.3.1/32 DIRECT 0
4.4.4.0/24 DIRECT0
ethernet2/0/0
ROTOCOL
Proto Pre Cost
DIRECT 0 0
0 0
0 0
0 127.0.0.1
0
0 127.0.0.1
0
Nexthop
1.1.1.1
127.0.0.1 InLoopBack0
2.2.2.1 Interface
InLoopBack0
3.3.3.1 Interface
InLoopBack0
4.4.4.1 Interface
Interface
Interface