3Com 3031 Command Reference Manual page 821

display mpls te tunnel
By default, the link information of all RSVP interfaces will be displayed.
Example
Display MPLS TE link-administration bandwidth distribution.
[3Com] display mpls te link-administration bandwidth-distribution
Ethernet4/0/1
System Information::
Links Count: 2
Link ID: Et4/0/1 (10.1.0.6)
Physical Bandwidth: 10000 kbits/sec
Max Reservable BW: 5000 kbits/sec (reserved:0% in, 60% out)
Up Thresholds: 15 30 45 60 75 80 85 90 95 96 97 98 99 100 (default)
Down Thresholds: 100 99 98 97 96 95 90 85 80 75 60 45 30 15 (default)
Downstream Bandwidth Information (kbits/sec):
KEEP PRIORITY
0
1
2
3
4
5
6
7
Syntax
display mpls te tunnel [ destination address ] [ up ][ down ] [ lsr-role { all | ingress |
egress | remote | transit } ] [ name tun-name ] [ incoming-interface interface-type
interface-number] [ outgoing-inteface interface-type interface-number ] [ interface
interface-type interface-number ] [ tunnel-identifier tun-id | ip-address ] [verbose]
View
Any view
Parameter
destination address: Displays the tunnels with this specified destination address.
up: Displays the tunnels in UP state.
down: Displays the tunnels in DOWN state.
lsp-role { all | ingress | egress | remote | transit }: Displays the tunnels with specified
role (all, ingress, egress, remote and transmit).
name tun-name: Displays the tunnel information with a specified name. If this
parameter is selected, the tunnel name will be got from the interface description.
Otherwise, tunnel name is contained in signaling messages and will be got by all
hops along the explicit path.
incoming-interface: Displays the tunnels using the specified ingress.
outgoing-interface: Displays the tunnels using the specified egress.
interface: Displays the tunnels using the specified ingress or egress.
MPLS TE Configuration Commands
LOCKED BW TOTAL LOCKED
0 0
3000 3000
0 3000
0 3000
0 3000
0 3000
0 3000
0 3000
821