Mpls Basic Configuration Commands; Basic Configuration Commands - 3Com 3031 Command Reference Manual

8
Basic Configuration
Commands
debugging mpls lspm

MPLS Basic Configuration Commands

This chapter describes the following types of commands:

Basic Configuration Commands

LDP Configuration Commands
BGP/MPLS VPN Configuration Commands
MPLS L2VPN CCC Configuration Commands
SVC MPLS L2VPN Configuration Commands
Martini MPLS L2VPN Configuration Commands
Kompella MPLS L2VPN Configuration Commands
MPLS TE Configuration Commands
Syntax
debugging mpls lspm { all | packet | event | ftn | process | agent | interface | policy |
vpn }
undo debugging mpls lspm { all | packet | event | ftn | process | agent | interface |
policy | vpn }
View
User view
Parameter
agent: Enables all MPLS Agent information debugging.
all: Enables all MPLS-related information debugging.
event: Enables information debugging of various MPLS events.
ftn: Enables MPLS ftn debugging.
interface: Enables the MPLS information debugging on the message
sending/receiving interface.
packet: Enables MPLS packet debugging.
policy: Enables MPLS information debugging.